Hi guys, A strange thing is happening in our office where emails are linking to opportunities some days and on other days there are not. Emailing the same person today and tomorrow could result in no emails attaching or both attaching or even just one. Sending the email from outlook on the web offers the same issue. It might work today and tomorrow it might not. Before I dive in to the world of Microsoft support, is there anything obvious which has changed in the last couple of months which has made the outlook add-in unreliable?
↧
Forum Post: Outlook add-in: Attaching email to opportunity only working intermittently
↧
Forum Post: UCI Interface permission to disable create flow but run existing flows
Hi all, Greetings, I have recently upgraded my organization to UCI Inteface and enabled flow so that user can run workflows. however create flow button is coming. I dont want users to create flow only run workflows. please advice if there is setting permission to do so Thanks in advance
↧
↧
Forum Post: RE: Editing a view/grid...
Hi, Business Rules will only work when columns/fields which you make required is part of view. Which means you should add all the fields associated to business rules to run business rules in editable grid otherwise business rules will not trigger.
↧
Forum Post: RE: Editing a view/grid...
Good to know, thank you. One other thing...I am trying to find some videos on 365 v9 for on prem to show the new features to my power users. Or, some video that is close to show this. Thank you.
↧
Forum Post: RE: Mapping data isn't working
I think the mapping only works in the UI if you pass additional parameters on the querystring extraqs parameter. These are _CreateFromId and _CreateFromType. If you go to the Navigation item for Students on the Campus form, then click Add New Student, you can see what the querystring should look like. However, I don't think these are documented, so they are officially unsupported.
↧
↧
Forum Post: Adxstudio portal v.7 search error: Unable to load DLL 'osafehtm.dll': The specified module could not be found.
Hello, We are getting the following error when we try to use the search bar on the home page of our adxstudio portal: Unable to load DLL 'osafehtm.dll': The specified module could not be found. The issues seems to have occurred following a recent update. I tried the following steps to resolve the issue, but so far no luck: - install adxstudio search solution and enable search service - reference osafehtm.dll in visual studio portal project (dll file could not be referenced) Any help with this issue would be greatly appreciated. We have been spinning around for weeks with it now. Thank you.
↧
Forum Post: RE: Differences Between Synchronous And Asynchronous Workflow
The workflow (whether synchronous or asynchronous) only runs when data is sent to the server. This will be when the user clicks 'Save', but will also happen if AutoSave is enabled. If you have AutoSave enabled, and a workflow that is triggered on the update of multiple fields, and the user changes several of these fields, you cannot control whether the workflow will only run once, or may run multiple times - it depends whether AutoSave happens part way through the data changes
↧
Forum Post: RE: Clear partial audit history
When you delete records, the space they take up will become available, but it may remain allocated in SQL Server. This allocation works at 2 levels: At the table and index level. If any page (8K of space) still has at least 1 record, then this is still allocated. To reclaim the space, rebuild the indexes on the table At the database level. Even if the pages have been freed up, the database size will stay the same (unless you either have Autoshrink enabled). You can shrink the database using SQL Management Studio There will still be space taken up by the SQL transaction log, and deleting a record will add to the transaction log. However, it should be part of your standard database maintenance procedures to periodically truncate the log, preferably by backing it up
↧
Forum Post: RE: How to write multiple AND and OR condition in SSRS Expressions
You can also use AndAlso instead of And, and ORELSE instead of OR. These short-circuit the logic, which is useful if any of the fields contain a null value, which might otherwise cause the expression to fail
↧
↧
Forum Post: Product Properties
Hi everyone, I started setting up properties in products, all works fine i can add details etc. But now what ? How can i use them ? How i can view them except the inline edit ? How can i view them them in a subgrid or in a ssrs report or even get statistics out of them ? Thank you in advance Chris
↧
Forum Post: RE: Use linq or fetchxml query with dynamic entity list
Bump anyone?
↧
Forum Post: RE: Unable to connect CRM on premise through console app using "Service" account.Getting below error.
Yes,i am using correct domain,correct url and password.Since when i tried with some other user account it working.Only with service account this issue. But same service account working fine when i login to site from browser.
↧
Forum Post: RE: Query for not related to a record
Hi Bhavika and thanks for your response. We are on v8 - so we don't have that functionality. But my question was actually a little deeper. Pretend I have a contact, John Smith. John Smith is a member of Marketing List A and Marketing List B. With a query I would like to find John Smith and add him to Marketing List C if he is not a member of Marketing List A. The query above will not do as I intend as John Smith is also on Marketing List B. So the query will show John Smith, when I want the query to exclude him as he is on Marketing List A. Does that make sense? It may not be possible, but it feels like it should be. Thanks, Rob
↧
↧
Blog Post: Artificial Intelligence could help to best reach Millennials and Gen-Z’s
More and more often we are asked by our clients to optimize store traffic for the flagship stores in Asia. Exorbitant rent of the prime location, high cost of personnel, maintenance, decoration, inventory and in-store sales not high enough, doesn’t make the flagship profitable. From the stores come indications that the majority of visitors and buyers who visit are over 40. In short, the store was lacking in millennials and younger Generation-Z consumers. This is typical for many luxury (and non-luxury) brands, so you’re probably reflected in this issue. Continue reading -->
↧
Forum Post: RE: Editing a view/grid...
Hi , Seems this is different questions , I would request you to open another thread to make thread clean with specific topic and close this thread if you think above answer helps you.
↧
Forum Post: RE: Product Properties
If you have added new attributes to product entity, you should be able to use add them to views and also use the filtered view columns in your SSRS report
↧
Forum Post: CRM 2016 Update Failure at 8.0.0.528 - TargetInvocationException
Hi, I am trying to upgrade our existing on premise deployment from 8.0.0.528 to 8.2.003.008. Unfortunately the deployment manager throws the following error when I try to upgrade my instance. According to the xRM Toolbox the priviledge is available. The user is a system administrator. Any suggestions are welcome. Thank you very much! Ralf 16:38:20| Info| CrmAction execution time; InstallDatabaseUpdatesAction; 00:02:54.4208228 16:38:20| Error| Installer Complete: OrganizationDatabaseHotFixer - Error encountered 16:38:21| Error| Exception occured during Microsoft.Crm.Tools.Admin.OrganizationDatabaseHotFixer: Error.ActionFailed Microsoft.Crm.Tools.Admin.InstallDatabaseUpdatesAction InnerException: System.Reflection.TargetInvocationException: Ein Aufrufziel hat einen Ausnahmefehler verursacht. ---> System.ServiceModel.FaultException`1[Microsoft.Xrm.Sdk.OrganizationServiceFault]: Principal user (Id=7b22072a-4757-e311-8401-00505694701d, type=8) is missing prvReadmsdyn_PostRuleConfig privilege (Id=6e22414c-af5e-4b61-b49c-719232eeab48) bei Microsoft.Crm.Extensibility.OrganizationSdkServiceInternal.Execute(OrganizationRequest request, CorrelationToken correlationToken, CallerOriginToken callerOriginToken, WebServiceType serviceType, Boolean checkAdminMode, ExecutionContext executionContext) bei Microsoft.Crm.Extensibility.InprocessServiceProxy.ExecuteCore(OrganizationRequest request) bei Microsoft.Crm.SE.DllMethodActions.UpdateActivityFeedsCaseAssignPlugin.GetPostRuleConfigId() bei Microsoft.Crm.SE.DllMethodActions.UpdateActivityFeedsCaseAssignPlugin.UpdatePostConfigRule() --- Ende der internen Ausnahmestapelüberwachung --- bei System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor) bei System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments) bei System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture) bei System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParams) bei Microsoft.Crm.Setup.Database.DllMethodAction.Execute(Guid organizationId, Nullable`1 operationType) bei Microsoft.Crm.Setup.Database.DatabaseInstaller.ExecuteReleases(ReleaseInfo releaseInfo, Boolean isInstall) bei Microsoft.Crm.Setup.Database.DatabaseInstaller.Install(Int32 languageCode, String configurationFilePath, Boolean upgradeDatabase, Boolean isInstall) bei Microsoft.Crm.Setup.Database.DatabaseInstaller.InstallUpdate(String configurationFilePath, Boolean upgradeDatabase) bei Microsoft.Crm.Setup.Common.Update.DBUpdateDatabaseInstaller.ApplyDBUpdates(Guid orgId, Nullable`1 operationType) bei Microsoft.Crm.Tools.Admin.InstallDatabaseUpdatesAction.ApplyDBUpdatesInternal(Guid orgId, String orgUniqueName, String releaseFilePath, Boolean ignoreErrors, OrganizationOperationType operationType) bei Microsoft.Crm.Tools.Admin.InstallDatabaseUpdatesAction.ApplyDBUpdates(Guid orgId, String orgUniqueName, OrganizationOperationType operationType) bei Microsoft.Crm.Tools.Admin.InstallDatabaseUpdatesAction.Do(IDictionary parameters) bei Microsoft.Crm.Setup.Shared.CrmAction.ExecuteAction(CrmAction action, IDictionary parameters, Boolean undo) InnerException: System.ServiceModel.FaultException`1[Microsoft.Xrm.Sdk.OrganizationServiceFault]: Principal user (Id=7b22072a-4757-e311-8401-00505694701d, type=8) is missing prvReadmsdyn_PostRuleConfig privilege (Id=6e22414c-af5e-4b61-b49c-719232eeab48) (Fehlerdetail ist gleich Microsoft.Xrm.Sdk.OrganizationServiceFault).
↧
↧
Forum Post: RE: Product Properties
Thank you for your answer Kokulan. The Product views has nothing to do with what i asked. I mean i have insert some values in the properties of a product on a quotation let's say. How can i have in a subgrid or in a report, these values. I want to show to the client what he bought for example. Regards
↧
Forum Post: RE: UCI Interface permission to disable create flow but run existing flows
Hello, I don't think there is a special permission for that. What you can do is to try to edit Ribbon using RibbonWorkbench. Good luck.
↧
Forum Post: RE: MS Dynamics 365 Running slow for users 28-03-2019 3.25pm
Hello Helen, My recommendation is to get in touch with Microsoft and ask for support.
↧